Trii Plex Jettech Systems

Hydro Test Pump. NHD Model.Hawk Made in Italy. Available in 3 hp to 5hp.

We thank you for your enquiry.

 

Enclosed please find herewith a detailed Techno-Commercial proposal for your ready reference.

 

As a supplier of High-Pressure Triplex Plunger Pump, it is our concern to see that you get highest value for money with our product; our product is superior to our competitors and also available at lower rate.

 

It will be a pleasure to have a long-term business relation with your esteemed company.

 

Once we complete order, our task is not being considered as complete. We believe in to be superior service.

Hydro Test Pump. NPM Model.Hawk Made in Italy. Available in 7.5 hp to 12.5 hp.

Accessories we supply with systems:

• Triplex Plunger Bare Pump
• Electric Motor (Three Phase – Standard / Flameproof)
• Platform (Base frame / Trolley mounted)
• Pressure Gauge
• Unloader Valve
• Pressure Relief Valve
• Electric Control Panel (Standard / Flameproof)
• Trigger Operated Gun (Without Trigger available)
• High Pressure Rubber Hose – 10 Mtrs
• Low Pressure Suction & Bypass hose
• Cleaning Nozzles
• Rigid Lances – 400mm, 600mm, 800mm, 1000mm

Advantages:

The advantages of Triplex High Pressure Piston Pumps in their high efficiency, their ability to generate high pressure and to produce constant volume irrespective of the pressure. Consequently, where an application demands controlled variable flow, they are eminently suited to variable speed drives. Using a Triplex High Pressure Pump with a variable speed drive can provide very high efficiencies, up to 95% depending on the pump type design and how it has been installed, across a wide range of flow rates and pressures.

Technical Features about Plunger Pump:

• Pump Head: Forged Brass.
• Plungers: Solid Ceramic Plungers.
• Pump Main Body: Fully anodized Crankcase.
• Connecting Rod: High wear resistant Forged Alloy Steel.
• Crank Shaft: High wear resistant Forged Alloy Steel.
• Plunger Seal: Improved low and high pressure seals.
• Valve Assembly: High wear resistant Stainless Steel.
• Oil: 15W40.

Trii-plex Jettech Systems are Manufacturers of High Pressure Hydrostatic Test Pumps 15 LPM Flow Rate and Pressure 250 BAR with Electric Driven.

High Pressure Hydrostatic Test Pumps are Characteristic capability to perform Hydro Test of Tubes, Pipes, Hoses, Cylinder, Hydro test of Pressure Vessels Boilers, Hydrostatic Test Pump of Cross Country Pipe Lines, Valves, Castings, Components, etc. for Leaks, Cracks or Defects.

Every Pressure Test is different and that is why the solutions of our Trii-plex Jettech Systems engineers are as diverse as your applications. For with our extensive expertise we can adapt every Test Pump to your specific needs. Pressure and Flow Rates can be individually set and controlled and the pressure testing progression can be clearly logged. With Hydrostatic Testing, component or vessel is tested with a liquid (typically water), and pressurizing until test pressure is reached. Once the pressure is reached, the test is complete, and for other tests hydrostatic pressure must be held for a specific amount of time. Depending on the application, the hydrostatic testing can be used to help identify leaks, structural integrity, manufacturing flaws, wear, corrosion and burst pressure.

Technical Specification:
Model No: NPM-15.250
Flow Rate: 15 LPM (3.96 GPM)
Min. Pressure: 180 BAR (2610 PSI)
Max. Pressure: 250 BAR (3600 PSI)
Motor(HP): 7.5HP~10HP (Standard/Flameproof)

Technical Features about Plunger Pump:
Pump Head: Forged Brass.
Plungers: Solid Ceramic Plungers.
Pump Main Body: Fully anodized Crankcase.
Connecting Rod: High wear resistant Forged Alloy Steel.
Crank Shaft: High wear resistant Forged Alloy Steel.
Plunger Seal: Improved low and high pressure seals.
Valve Assembly: High wear resistant Stainless Steel.
Oil: 15W40

Features:

1. Robust Construction
2. Low and Easy Maintenance
3. Simple and Comfortable Design
4. Easy Installation
5. Volumetric Efficiency 95% (maximum)
6. Extra Heavy duty Power Frame ensures uninterrupted smooth long life
7. Easy to maintain, simple to repair nominal maintenance needed in case of breakdown

Applications:

• Cross Country Pipelines
• Pressure Vessels
• C.I. Mains
• Casting Parts
• Boilers
• Gas Cylinders
• Pipes Tube Parts
• Fire Extinguisher

Special Features:

• Electrically Motorized Driven System, Totally Dependable, Reliable and Efficient Performance.
• Standard Accessories:
• Triplex Plunger Bare Pump
• Electric Motor (Three Phase – Standard / Flameproof)
• Platform (Base frame / Trolley mounted)
• Pressure Gauge
• Pressure Relief Valve
• Electric Control Panel (Standard / Flameproof)
• High Pressure Hydraulic Rubber Hose – 10 Mtrs, 15Mtrs, 20Mtrs, 25Mtrs, etc.
• Low Pressure Suction Bypass hose

Trii-plex Jettech Systems are Manufacturers of Hydrostatic Pressure Testing Pumps Equipments of 21 LPM Flow Rate and Pressure 500 Kg/cm2 with Accessories, Spare Parts.

Hydrostatic Testing Pumps are Characteristic capability to perform Pressure Test of Tubes, Pipes, Hoses, Cylinder, Pressure Vessels Boilers, Hydrostatic Test of Cross Country Pipe Lines, Valves, Castings, Components, etc. for Leaks, Cracks or Defects.

Every Pressure Test is different and that is why the solutions of our Trii-plex Jettech Systems engineers are as diverse as your applications. For with our extensive expertise we can adapt every Test Pump to your specific needs. Pressure and Flow Rates can be individually set and controlled and the pressure testing progression can be clearly logged. With Hydrostatic Testing, component or vessel is tested with a liquid (typically water), and pressurizing until test pressure is reached. Once the pressure is reached, the test is complete, and for other tests hydrostatic pressure must be held for a specific amount of time. Depending on the application, the hydrostatic testing can be used to help identify leaks, structural integrity, manufacturing flaws, wear, corrosion and burst pressure.

Technical Specification:
Model No: PXI-21.500
Flow Rate: 21 LPM (5.55 GPM)
Min. Pressure: 250 BAR (3625 PSI)
Max. Pressure: 500 BAR (7250 PSI)
Motor (HP): 15HP~30HP (Standard / Flameproof)

Technical Features about Plunger Pump:
Pump Head: Forged Brass.
Plungers: Solid Ceramic Plungers.
Pump Main Body: Fully anodized Crankcase.
Connecting Rod: High wear resistant Forged Alloy Steel.
Crank Shaft: High wear resistant Forged Alloy Steel.
Plunger Seal: Improved low and high pressure seals.
Valve Assembly: High wear resistant Stainless Steel.
Oil: 15W40

Features:

• Robust Construction
• Low and Easy Maintenance
• Simple and Comfortable Design
• Easy Installation
• Volumetric Efficiency 95% (maximum)
• Extra Heavy duty Power Frame ensures uninterrupted smooth long life
• Easy to maintain, simple to repair nominal maintenance needed in case of breakdown

Applications:

• Cross Country Pipelines
• Pressure Vessels
• C.I. Mains
• Casting Parts
• Boilers
• Gas Cylinders
• Pipes Tube Parts
• Fire Extinguisher

Special Features:
Electrically Motorized Driven System, Totally Dependable, Reliable and Efficient Performance.

Standard Accessories:

• Triplex Plunger Bare Pump
• Electric Motor (Three Phase – Standard / Flameproof)
• Platform (Base frame / Trolley mounted)
• Pressure Gauge
• Pressure Relief Valve
• Electric Control Panel (Standard / Flameproof)
• High Pressure Hydraulic Rubber Hose – 10 Mtrs, 15Mtrs, 20Mtrs, 25Mtrs, etc
• Low Pressure Suction Bypass hose

Trii-plex Jettech Systems are Manufacturers; Suppliers of Electric Hydrostatic Pressure Test Pumps 17 LPM Flow Rate and Pressure 350 BAR at Ahmedabad, Gujarat, India.

Pressure Test Pumps are Characteristic capability to perform Hydrostatic Test of Tubes, Pipes, Hoses, Cylinder, Hydro testing of Pressure Vessels Boilers, Hydrostatic Test Pump of Cross Country Pipe Lines, Valves, Castings, Components, etc. for Leaks, Cracks or Defects.

Every Pressure Test is different and that is why the solutions of our Trii-plex Jettech Systems engineers are as diverse as your applications. For with our extensive expertise we can adapt every Test Pump to your specific needs. Pressure and Flow Rates can be individually set and controlled and the pressure testing progression can be clearly logged. With Hydrostatic Testing, component or vessel is tested with a liquid (typically water), and pressurizing until test pressure is reached. Once the pressure is reached, the test is complete, and for other tests hydrostatic pressure must be held for a specific amount of time. Depending on the application, the hydrostatic testing can be used to help identify leaks, structural integrity, manufacturing flaws, wear, corrosion and burst pressure.

Technical Specification:
Model No: PXI17.350
Flow Rate: 17 LPM (4.49 GPM)
Min. Pressure: 275 BAR (4000 PSI)
Max. Pressure: 350 BAR (5000 PSI)
Motor(HP): 12.5HP~15HP (Standard / Flameproof)

Technical Features about Plunger Pump:
Pump Head: Forged Brass.
Plungers: Solid Ceramic Plungers.
Pump Main Body: Fully anodized Crankcase.
Connecting Rod: High wear resistant Forged Alloy Steel.
Crank Shaft: High wear resistant Forged Alloy Steel.
Plunger Seal: Improved low and high pressure seals.
Valve Assembly: High wear resistant Stainless Steel.
Oil: 15W40

Features:

• Robust Construction
• Low and Easy Maintenance
• Simple and Comfortable Design
• Easy Installation
• Volumetric Efficiency 95% (maximum)
• Extra Heavy duty Power Frame ensures uninterrupted smooth long life
• Easy to maintain, simple to repair nominal maintenance needed in case of breakdown

Applications:

• Cross Country Pipelines
• Pressure Vessels
• C.I. Mains
• Casting Parts
• Boilers
• Gas Cylinders
• Pipes Tube Parts
• Fire Extinguisher

Special Features:
Electrically Motorized Driven System, Totally Dependable, Reliable and Efficient Performance.

Standard Accessories:

• Triplex Plunger Bare Pump
• Electric Motor (Three Phase – Standard / Flameproof)
• Platform (Base frame / Trolley mounted)
• Pressure Gauge
• Pressure Relief Valve
• Electric Control Panel (Standard / Flameproof)
• High Pressure Hydraulic Rubber Hose – 10 Mtrs, 15Mtrs, 20Mtrs, 25Mtrs, etc.
• Low Pressure Suction Bypass hose

Plunger Pump is a type of positive displacement pump used to move fluids at high pressures. It operates by a reciprocating plunger or piston that moves in and out of a cylinder, creating a vacuum that draws fluid in and then forces it out under pressure.

Every Electric Hydro Testing Pumps are different and that is why the solutions of our Trii-plex Jettech Systems engineers are as diverse as your applications. For with our extensive expertise we can adapt every Pressure Testing Pump to your specific needs. Pressure and Flow Rates can be individually set and controlled and the pressure testing progression can be clearly logged. With Hydrostatic Testing, component or vessel is tested with a liquid (typically water), and pressurizing until test pressure is reached. Once the pressure is reached, the test is complete, and for other tests hydrostatic pressure must be held for a specific amount of time. Depending on the application, the hydrostatic testing can be used to help identify leaks, structural integrity, manufacturing flaws, wear, corrosion and burst pressure.

Trii-plex Jettech Systems are Manufacturers; Suppliers Exporters of Hydro Testing Pumps 30 LPM and Pressure 200 BAR with Electric Driven Diesel Driven.

Electric Hydro Pressure Test Pumps are Characteristic capability to perform Hydro Test of Tubes, Pipes, Hoses, Cylinder, Hydro testing of Pressure Vessels Boilers, Hydrostatic Test Pump of Cross Country Pipe Lines, Valves, Castings, Components, etc. for Leaks, Cracks or Defects.

Technical Specification:
Model No: NLTI-30.200
Flow Rate: 30 LPM (7.93 GPM)
Min. Pressure: 90 BAR (1300 PSI)
Max. Pressure: 200 BAR (2900 PSI)
Motor (HP): 7.5HP~17.5HP (Standard / Flameproof)

Technical Features about Plunger Pump:
Pump Head: Forged Brass.
Plungers: Solid Ceramic Plungers.
Pump Main Body: Fully anodized Crankcase.
Connecting Rod: High wear resistant Forged Alloy Steel.
Crank Shaft: High wear resistant Forged Alloy Steel.
Plunger Seal: Improved low and high pressure seals.
Valve Assembly: High wear resistant Stainless Steel.
Oil: 15W40

Features:

• Robust Construction
• Low and Easy Maintenance
• Simple and Comfortable Design
• Easy Installation
• Volumetric Efficiency 95% (maximum)
• Extra Heavy duty Power Frame ensures uninterrupted smooth long life
• Easy to maintain, simple to repair nominal maintenance needed in case of breakdown

Applications:

1. Cross Country Pipelines
2. Pressure Vessels
3. C.I. Mains
4. Casting Parts
5. Boilers
6. Gas Cylinders
7. Pipes Tube Parts
8. Fire Extinguisher

Standard Accessories:

• Pressure Release Valve made from Brass Metal.
• Discharge Pressure Hose with Attachment of ½” BSP Length 10 Mtrs.
• Stainless Steel Glycerin filled Pressure Gauge with 4” inch Dial.
• Suction Discharge valve (NRV) Made from Stainless steel Material.
• Pressure Set Valve Made from Stainless Steel.

Optional Accessories:

• Automation Control Panel
• Water Tank with water capacity of 50 liters
• Trolley Mounted

Motorized High Pressure Test Pump is Characteristic capability to perform Hydrostatic Test of Tubes, Pipes, Hoses, Cylinder, Pressure Vessels Boilers, Cross Country Pipe Lines, Valves, Castings, Components, etc. for Leaks, Cracks or Defects.

Trii-plex Jettech Systems are Manufacturers; Suppliers Exporters of Hydrostatic Pressure Testing Pumps 21 LPM and Pressure 200 BAR with whole systems Accessories.

Every Pressure Test is different and that is why the solutions of our Trii-plex Jettech Systems engineers are as diverse as your applications. For with our extensive expertise we can adapt every Test Pump to your specific needs. Pressure and Flow Rates can be individually set and controlled and the pressure testing progression can be clearly logged. With Hydrostatic Testing, component or vessel is tested with a liquid (typically water), and pressurizing until test pressure is reached. Once the pressure is reached, the test is complete, and for other tests hydrostatic pressure must be held for a specific amount of time. Depending on the application, the hydrostatic testing can be used to help identify leaks, structural integrity, manufacturing flaws, wear, corrosion and burst pressure.

Technical Specification:
Model No: NMT-21.200
Flow Rate: 21 LPM (5.55 GPM)
Min. Pressure: 90 BAR (1300 PSI)
Max. Pressure: 200 BAR (2900 PSI)
Motor (HP): 5HP~12.5HP (Standard / Flameproof)

Technical Features about Plunger Pump:
Pump Head: Forged Brass.
Plungers: Solid Ceramic Plungers.
Pump Main Body: Fully anodized Crankcase.
Connecting Rod: High wear resistant Forged Alloy Steel.
Crank Shaft: High wear resistant Forged Alloy Steel.
Plunger Seal: Improved low and high pressure seals.
Valve Assembly: High wear resistant Stainless Steel.
Oil: 15W40

Features:

1. Robust Construction
2. Low and Easy Maintenance
3. Simple and Comfortable Design
4. Easy Installation
5. Volumetric Efficiency 95% (maximum)
6. Extra Heavy duty Power Frame ensures uninterrupted smooth long life
7. Easy to maintain, simple to repair nominal maintenance needed in case of breakdown

Applications:

• Cross Country Pipelines
• Pressure Vessels
• C.I. Mains
• Casting Parts
• Boilers
• Gas Cylinders
• Pipes Tube Parts
• Fire Extinguisher

Special Features:
Electrically Motorized Driven System, Totally Dependable, Reliable and Efficient Performance.

Standard Accessories:

• Triplex Plunger Bare Pump
• Electric Motor (Three Phase – Standard / Flameproof)
• Platform (Base frame / Trolley mounted)
• Pressure Gauge
• Pressure Relief Valve
• Electric Control Panel (Standard / Flameproof)
• High Pressure Hydraulic Rubber Hose – 10 Mtrs, 15Mtrs, 20Mtrs, 25Mtrs, etc
• Low Pressure Suction Bypass hose

Trii-plex Jettech Systems are Manufacturers of High Pressure Hydrotest Pump 30 LPM and Pressure 500 Kg/cm2 with Triplex Plunger Pump Accessories, Spare Parts.

Electric Hydro Test Pumps are Characteristic capability to perform Pressure Test of Tubes, Pipes, Hoses, Cylinder, Pressure Vessels Boilers, Hydrostatic Test of Cross Country Pipe Lines, Valves, Castings, Components, etc. for Leaks, Cracks or Defects.

Every Pressure Test is different and that is why the solutions of our Trii-plex Jettech Systems engineers are as diverse as your applications. For with our extensive expertise we can adapt every Test Pump to your specific needs. Pressure and Flow Rates can be individually set and controlled and the pressure testing progression can be clearly logged. With Hydrostatic Testing, component or vessel is tested with a liquid (typically water), and pressurizing until test pressure is reached. Once the pressure is reached, the test is complete, and for other tests hydrostatic pressure must be held for a specific amount of time. Depending on the application, the hydrostatic testing can be used to help identify leaks, structural integrity, manufacturing flaws, wear, corrosion and burst pressure.

Technical Specification:

• Model No: HHP-30.500
• Flow Rate: 30 LPM (7.93 GPM)
• Max. Pressure: 500 BAR (7250 PSI)
• Motor (HP): 40 HP (Standard / Flameproof)

Technical Features about Plunger Pump:

• Pump Head: Forged Brass.
• Plungers: Solid Ceramic Plungers.
• Pump Main Body: Fully anodized Crankcase.
• Connecting Rod: High wear resistant Forged Alloy Steel.
• Crank Shaft: High wear resistant Forged Alloy Steel.
• Plunger Seal: Improved low and high pressure seals.
• Valve Assembly: High wear resistant Stainless Steel.
• Oil: 15W40.

Features:

• Robust Construction
• Low and Easy Maintenance
• Simple and Comfortable Design
• Easy Installation
• Volumetric Efficiency 95% (maximum)
• Extra Heavy duty Power Frame ensures uninterrupted smooth long life
• Easy to maintain, simple to repair nominal maintenance needed in case of breakdown

Applications:

• Cross Country Pipelines
• Pressure Vessels
• C.I. Mains
• Casting Parts
• Boilers
• Gas Cylinders
• Pipes Tube Parts
• Fire Extinguisher

Special Features:
Electrically Motorized Driven System, Totally Dependable, Reliable and Efficient Performance.

Standard Accessories:

1. Triplex Plunger Bare Pump
2. Electric Motor (Three Phase - Standard / Flameproof)
3. Platform (Base frame / Trolley mounted)
4. Pressure Gauge
5. Pressure Relief Valve
6. Electric Control Panel (Standard / Flameproof)
7. High Pressure Hydraulic Rubber Hose - 10 Mtrs, 15Mtrs, 20Mtrs, 25Mtrs, etc
8. Low Pressure Suction Bypass hose

Jet Cleaning Machine is manufactured using supreme grade components by our skilled professionals at modern production unit. In addition to this, the provided Water Jet Cleaner Pump can be bought from us at reasonable rates.

Key Points: Sturdiness, Less maintenance, Optimum strength, Defect free

Applications:

• Cleaning after pickling in steel industry
• Hydro Pressure Test
• Parking Area Cleaning
• Heavy Vehicle, Car Wash Cleaning
• Casting cleaning
• Tank cleaning
• Live wire insulator washing
• Concrete and brick cleaning
• De-burring molded parts
• Utensil cleaning
• Cleaning of concrete mixers
• Felt wire screen cleaning
• Machinery cleaning
• Paper machine cleaning
• Pressure cleaning in poultry farms

Accessories we supply with systems:

• Plunger Bare Pump (HAWK Make)
• Electric Motor (Three Phase – Standard / Flameproof)
• Platform (Base frame / Trolley mounted)
• Pressure Gauge
• Unloader Valve (Pressure Relief Valve)
• DOL Starter / Control Panel
• Suction Filter
• Trigger Operated Gun (Without Trigger available)
• High Pressure Suction Hose – 10 Mtrs
• Low Pressure Bypass hose
• Cleaning Nozzles
• Rigid Lances – 400mm, 600mm, 800mm, 1000mm

Advantage:

• Low cost
• washing Result is good
• Washing speed is fast
• High Price Quality Ratio
• Environment friendly
• Wide Application Range